QZ2013 Force balance acceleration sensor
1.The introduction of instrumentQZ2013 force balance acceleration sensor is a high-quality sensor with independent intellectual property rights jointly developed by the Institute of Engineering Mechan
1.The introduction of instrumentQZ2013 force balance acceleration sensor is a high-quality sensor with independent intellectual property rights jointly developed by the Institute of Engineering Mechan
QZ2013 force balance acceleration sensor is a high-quality sensor with independent intellectual property rights jointly developed by the Institute of Engineering Mechanics, China Earthquake Administration, and Hebei Zhenchuang Electronic Technology Co., Ltd.
The sensor uses active closed-loop servo and force balance technology, has good low-frequency characteristics and good impedance matching characteristics.
QZ2013force balance acceleration sensor can be used with G01NET series collector produced by our company, or with other collectors that collect voltage signals.
Figure 1 QZ2013 Force balance acceleration sensor
Figure1 QZ2013 Force balance acceleration sensor
Index name | Standard technical parameters | QZ2013 Technical parameter |
Measuring range | ±2.0g,±4.0g | ±2.0g(customizable) |
Sensor principle | / | Dynamic force-balance accelerometer |
Full scale output | ±2.5g\±4.0g;Single-ended, differential optional | ±2.5g\±4.0g;Single-ended, differential optional |
Acceleration resolution | / | 0.000002g |
Sensitivity | / | 1-3v/g |
Frequency response | 0-50hz | 0-200hz |
Dynamic range | ≥120db | ≥125db |
Linearity error | ≤1% | ≤1% |
Lateral sensitivity ratio | ≤1%(Including angular deviation) | ≤1%(Including angular deviation) |
Noise root mean square value | ≤10-6g | ≤10-6g |
Waterproof level | IP68Can be used underwater for a long time | |
Zero drift | ≤500ug/℃ | ≤500ug/℃ |
Anti-electromagnetic interference | / | Low voltage electromagnetic compatibility and certificate |
Operating environment | Temperature:-20℃~65℃Humidity:≤90℃ | Temperature:-30℃~75℃ |
Size | / | Volume;130×100×150mm |
It is mainly used for vibration monitoring of bridges, machinery, dams, buildings, mountain slopes, fan towers and other buildings.
High reliability and long service life.
High resolution.
High sensitivity.
High waterproof level.