G01NET-3(D) High precision dynamic data acquisition instrument

1.Product introductionG01NET-3(d) high-precision data acquisition instrument is a dynamic data acquisition instrument with LCD touch screen, which has the functions of monitoring data synchronous acqu

1.Product introduction

G01NET-3(d) high-precision data acquisition instrument is a dynamic data acquisition instrument with LCD touch screen, which has the functions of monitoring data synchronous acquisition, field storage and real-time data upload. The acquisition instrument can be calibrated through the upper computer network; the network port or serial port can be selected to transmit raw data or analysis results. Collector built-in 16 G data memory card. Data in the memory card can be copied through the USB port of the instrument.

This instrument supports customers` secondary development. We can open the communication protocol of the acquisition instrument free of charge.

Please read the software instructions for detailed use of the software,  such as the instrument supporting special parameter setting software, data acquisition and analysis software(01NETCS2019S1 Data acquisition instrument Parameter setting software Instructions、Operation Manual of G01NETFDC2020S1 Wind power tower safety monitoring system、Operation Manual of DZJC2020S1 Ground motion and Vibration monitoring system

2.Main technical parameters of the product

Name of Index

Technical Parameter



Number of Input Channels

8~16 Channel(Default single-ended input, support differential input)

Input Range and Resolution


Sampling Freqency

16~600Hz(All channels are fully synchronized)

Storage Capacity and Format

Storage capacity:standard configuration 16G SD card,Storage format:Text format

Remote Data Transimission

It supports UDP, TCPIP Client and TCPIP Server. Default is TCPIP Server; Continuous transmission is the default after power on. 4GDTU can be used for data transmission

Time Correction Function

Manual calibration, remote server calibration

Display Function

7 inch or 4.3 inch LCD,

Dynamic Range


Power Supply


Power Dissipation

7 watts



Input impedence

1M Ohm

External Interface

7 inch LCD screen, 1 serial port,2 USB ports,

1 Internet port 

4.3 inch LCD screen : 1 serial,2 USB ports,1 Internet port

Operatiing Temperature

Temperature:-35℃~+70℃ :Humidity≤90%

Trriger Cut-off Frenquency

Soft trigger, default 20Hz, settable

Field Data Storage Trigger


Trigger based on amplitude

3.Application scope

Blasting monitoring, fan tower, bridge and other buildings safety monitoring

4.Product features

High precision, low power consumption, small volume, real-time data acquisition, triggered data storage, real-time data transmission, man-machine operation interface.

5.The Introduction of Instrument Appearance










Data transmission interface requires serial port to network port module to be

used, standby function.


12V output

Mark (+) on the connection terminal, connect the sensor's power cord to supply power to the sensor, multiple sensors can be shared.


Ground Wire(GND)

Mark (-) on the terminal, connect the sensor ground wire and shield wire and temperature compensation wire, multiple sensors can be shared.


Signal Channel

The labels 1~16 on the wiring terminals belong to the signal channel, which is

connected to the sensor signal line. Only one signal line is allowed for each




Use USB interface to connect mouse or U disk



Display the operation status and parameter setting of the acquisition instrument


12V input

Terminal block type 12V DC input interface 


12V input

The jack type 12V DC input interface supplies power to the collector, and the

power adapter is standard at the factory.



Universal network port, data transmission interface, connect to switch or server.


Reset Button

Power on for 5 seconds, restore the factory Settings of the network port IP and port number of the acquisition instrument

Terminal block detailed description:There are 22 interfaces in the terminal block of the collector, counting from right to left. Interfaces 1, 2, and 3 are the positive poles of the power supply for the sensor (marked with "+" on the label), 4, 5, and 6 are the grounds for connecting the sensor. The ground wire of the power supply of the wire and the sensor (marked "-" on the label). Ports 7 to 22 are labeled "1"-"16" on the label of the analog signal input interface, and are connected to the sensor signal line.Please connect in this order if the labels and ports do not correspond one by one.