G01NET-2B High-precision dynamic data acquisition instrument

1.Product introductionG01NET-2B is a multi-channel synchronous acquisition, real-time upload, high-precision dynamic data acquisition instrument. This acquisition instrument has 16 analog input channe

1.Product introduction

G01NET-2B is a multi-channel synchronous acquisition, real-time upload, high-precision dynamic data acquisition instrument. This acquisition instrument has 16 analog input channels with conversion accuracy of 24bit, which can be used with all the sensors of our company.

        This instrument supports customers' secondary development. We can open the communication protocol of the collector for free.

The instrument is equipped with special parameter setting software, data acquisition and analysis software. For detailed use of the software, please read the software instruction manual (G01NETCS2019S1 data acquisition instrument parameter setting software instruction manual, G01NETFDC2020S1 wind power tower safety monitoring system instruction manual, DZJC2020S1 engineering ground vibration and vibration monitoring system instruction manual).

2.The main technical parameter

Index name

Technical parameter

Type

G01NET-2B

Conversion accuracy

24

Selectable range of sampling rate

16~600Hz/channel (all channels are fully synchronized)

Analog input channel

16 Channels  (default single-ended input, support differential input)

Input range

-10~10V/0.005mV

Dynamic range

≥120dB

Data transmission

Universal network cable

Power supply

DC12V

Size(L*W*H,mm)

200*150*50

Operating temperature

Temperature:-40~80℃;Humidity:0~90%

Consumption

3W


3.The range of application

Blasting monitoring, fan tower, bridge and other structural safety monitoring.

4.Product features

High precision, low power consumption and small size.

5.Instrument appearance introduction


图片关键词图片关键词

 

 

No

Name

Description

① 

12V output

Mark (+) on the connection terminal, connect the sensor's power cord to supply power to the sensor

② 

GND

Marked (-) on the connection terminal, connected to the sensor ground wire and shielded wire, multiple sensors can be shared.

③ 

Analog signal input

There are a total of 16 signal input channels, marked (1) on the terminal, indicating analog signal input channel 1, and so on.

④ 

Network port

Universal network port, data transmission interface, connecting switch or server

⑤ 

12V input

Power supply for the acquisition instrument, the factory is equipped with a special adapter


首页
产品中心
工程案例
新闻快讯